The House Source

Looking for assistance with regards to shipping cars to Canada? Look no further! Everything you need to know about international auto shipping into Canada is right here. There are many rules and regulations instilled by the Canada Customs and Revenue Agency that need to be taken into account, fees that need to be paid, and forms that need to be completed, all of which you will find listed on this page.

In addition to that, you are also able to receive free quotes from many different International Auto Shipping Companies, located in many varying vicinities. The quotes are non binding and would be a good place to start.

But before you begin, here are some rules you need to be made aware of:

•    Cars shipped to Canada have to have been purchased in either America or Mexico within the last 15 years
•    The car needing to be shipped must have been made and equipped for North American territory and must be of current year
•    Certain models of cars are not accepted for international auto shipping into Canada, and will need to be cleared with the Canada Customs and Revenue Agency before they will be regarded as fit for entry
•    Certain alterations might need to be made before transport is accepted. These alterations must meet the criterion set out by the Canada Motor Vehicle Safety Act
•    Duty and tax on the car must be up to date before it is considered
•    All documentation for the vehicle must be available on hand for submission

If all of the above principles are met, you will find that your journey through international auto shipping is uncomplicated and stress free. Failing to meet these points will result in your request being declined.

Fees involved:

•    Please note that there are a number of fees involved when considering international auto shipping to Canada
•    The RIV (Registrar of Imported Vehicles) fee and excise tax are the primary fees and are compulsory
•    Excise tax will vary according to your vehicle

Forms needed:

Before proceeding further with the paying of your fees and duties with the Canada Customs and Revenue Agency, make sure that the appropriate forms are filled out and that the relevant documentation required for international auto shipping are attached.

•    Vehicle Import Form I:

This form must be submitted to the Customs Authority, along with the vehicle’s original receipt of purchase and the documents detailing the origin of the shipment. Payment of fees and duty would then need to be made and the document will be stamped reflecting clearance. From here, the clearance figures will be sent to the RIV who will forward Vehicle Import Form II.

•    Vehicle Import Form II:

This form needs to be completed by and presented to the Federal Inspection at Canadian Tire. Provided your documentation is in order and all the requirements set out above have been met, your submission will be filed as successful.

Bear in mind that the import rules for international auto shipping will vary according to each model, make and age of car as well as where the vehicle was purchased. After digesting all the above information you might want to start getting some free quotes using the online form. Good Luck!

International Moving

If you have just moved into a home for the first time on your own or perhaps into a climate that gets very cold during the winter, you might not think about this water damage prevention technique, but in the winter time it is a very important thing to remember.  This is the fact that water pipes can freeze, burst, and spill gallons upon gallons of water into or underneath your house.  This typically happens when the temperature gets under about 20 degrees.

The water pipes that you can get access to fairly easily should be insulated with something to keep them warm and you need to realize that your pipes need to be exposed to as much warm air as possible during the winter to keep them from freezing up and bursting.  If the area of concern is the kitchen or the bathroom, then you can open the cabinets so that the pipes underneath are exposed to the warm air of the household.  Leave them this way as long as the temperature is under freezing outside and the pipes should have quite a bit of protection from bursting. 

Make sure you know where your stop tap is in case the pipes do happen to burst.  Knowing where this is located will make sure that you can turn the water off as quickly as possible should there be an incident.  Labeling it is also a good idea.

If you are spending the winter in a warmer climate, you should have a relative or a friend check on your house and make sure that the pipes have not burst or frozen up. 

Sometimes leaving a little bit of water running during the coldest parts of the winter is something that you can do to help prevent the pipes from freezing.  Flowing water through the pipes is more difficult to freeze than standing water.  They are less likely to freeze as quickly as pipes that have standing water inside them.

Your insurance policy will probably cover a burst pipe, since water damage is generally covered under these conditions.  The only time that water damage is not covered is when it is caused by a hurricane or a flood and you do not have insurance for these events.  Taking care of water spills like a burst pipe quickly is also very important to prevent the growth of mold in your home.  This can be a serious health risk to your family and pets if it is allowed to start growing and it usually does after about 48 hours.

Houston Water Damage

If your insurance adjuster claims that mold has been around for many years longer than we have and that it does not to the damage that the media and health community say that it does, then perhaps something you should have them read up on is a verse that comes straight out of the Bible and blatantly talks about homes that are diseased.

It is called a “leprous plague” in the scripture Leviticus 14:34; it appears growing on the walls and if a family went to the priest and said “my house is diseased”, it was ordered that the people leave the house so the priest could go in and examine it.  If it was determined to be diseased, then the stones of the house were to be removed and taken to a place that was away from town and from where people resided so that others would be safe from the plague.  Stones were brought in to replace the ones that were removed and it was watched to see if the mold returned; if it did return, the entire house was torn down and all the debris was taken to where the first stones were dumped.  

Mold was serious business in Biblical times just as it is today, but back then there were no formal antibiotics or fungicides to help get rid of the mold either in the body or on a person’s property, so most of the time it simply had to be torn down and replaced.  Even the deaths of the firstborns of Egypt are sometimes attributed by scholars to the presence of mold on the food that was stored underground after the locusts came.  If the food was contaminated with almost any mold, especially Stachybotrys atra, it is speculated that it would have been what killed all the firstborn children in Egypt at the time because during that period, it was customary for the eldest Egyptian child in a family to receive a second portion of food.  Food that has been stored underground, especially if it was stored directly on top of the soil, would have been a perfect food also for mold.  The Jews alive at the time would not have suffered from this plague because they ate herbs, lamb, and unleavened bread, which should have been safe from any mold contamination.

So, do not let your insurance adjuster fool you by trying to downplay the seriousness of mold.  It was serious over 2,000 years ago and it is just as serious today.

Detroit Commercial Flood Cleanup

One thing that most people who own a cell phone or a laptop are very concerned and careful of is spilling water or another liquid onto it. It happens quite often and can easily put you out $100 and up, depending on what the liquid ruins. Maybe you like to drink a cup of coffee while you’re working and you reach over for a pen and it topples onto your keyboard or maybe you’ve dropped your cell phone into the toilet or the bath tub. No matter how the liquid came into contact with your electronic device, most of the time you assume that it’s completely dead and there’s nothing that you can do about it. Sometimes this really isn’t the case.

Even if you completely submerse a CD player or other electronic device in water, if it’s not powered on at the time, it can usually be saved if you allow it to dry out completely before trying to turn it on and use it. One thing to worry about, though, is how long the object is allowed to stay in the water. Depending on what the inside is made out of, it may or may not absorb water and expand the longer it stays submerged. Wait at least a few days before trying to power on the device again and allow it to dry out naturally.

If you have a device that is powered on when it comes into contact with a liquid substance of any kind, unplug the device from the wall or from your car’s cigarette lighter or whatever power source it happens to be using at that moment. Remove any batteries that could accidentally be instructed to supply power to the device by pressing a button.

If you have an item that has been water damaged by more than just spilling a cup of liquid on it or just dropping it in the toilet, it’s best to consult a professional. For example, a computer that has been submerged in flood waters for a period of time isn’t that likely to be recovered, but with the right care and proper conditions, it can be done. It all depends on the circumstances of your situation, but whatever you do, don’t try to power on the device or use it in any way before it’s dry, no matter what size or kind of device it may be.

Article By: Ohio Flood Damage Cleanup

Medallian Security is proud to release a new line of products by ProVia Door

ProVia Door is committed to making doors the professional way. Our entry doors are energy efficient, built to the highest quality standards and give you a superior alternative to consumer-grade doors that are sold through home improvement retailers.

All ProVia entry doors qualify for the ENERGY STAR® program. ENERGY STAR was created by the U.S. EPA and Department of Energy to help consumers identify products that save energy and money and protect the environment. ProVia is proud that each door it produces is an ENERGY STAR door.

Installing these energy efficient doors will save you money on heating and cooling costs, improve interior comfort and increase the value of your home. To learn more about our ENERGY STAR doors, visit our fiberglass and steel door product page.

ProVia’s professional class doors are made from the highest quality materials, starting with 20-gauge galvannealed steel that gives you 49% more steel than a consumer-grade door. This exceptional durability is endorsed as “the door preferred by America’s top remodelers” and is backed by a lifetime limited transferable warranty.

State-of-the-art methods of customization make it possible for you to create entry doors that are made to order for your home. Visit our design center and choose the size, color, glass and hardware of your choice for an end result that will set your home apart for years to come.

To see these Door Replacement Maryland and more visit Medallian Security online